Manufacture:
1 ° boot
- Pin pattern and cut fabric edge.
- Sewing Machine at about 8mm from the edge of the boot.
- Notch (gently) in toe and heel.
- Return.
2 ° The reverse
- Cut Aida fabric following the boss.
- Place a piece of bias around the back of the boot (on the rounded side).
- Pin back on the right side of the boot and put a bias that sets the 2 pieces (boot + reverse).
3 The fastener
- Fold in 2 to rest through the clip.
- If there is one bit long, set to the desired size.
- Sew through the back of the boot.
* *
0 comments:
Post a Comment